Prahran, VIC store now open from Friday to Tuesday, 10am till 6pm.

Tsunehisa  |  SKU: TNHS-SKD-ST170-KOY

柴田 崇行 SLD鋼 和紙 三徳 170mm

定価 ¥19,900

Availability

  • St Peters, NSW
    2 Bishop St, Unit 2, St Peters NSW 2044
  • Crows Nest, NSW
    107 West St, Shop 1, Crows Nest NSW 2065
    Pickup only
  • Prahran, VIC
    180 Commercial Road, Shop 1, Prahran VIC 3181
    Pickup only
詳細仕様
ライン Tsunehisa SLD 和紙次
刃の形状 三徳 / 三徳
刃の種類 Double Bevel
重量 132 g | 4.7 oz
刃渡り 169 mm | 6 21/32″
あごの高さ 46 mm | 1 13/16″
あご部分の刃幅 2.0 mm | 5/64″
中央の刃幅 1.8 mm | 5/64″
切っ先から1cmの刃幅 0.9 mm | 1/32″
鋼材 SLD | ステンレス鋼
刃の構造 三枚合わせ・ステンレスクラッド
Hardness (HRC) 62 - 64
表面仕上げ 梨地仕上げ
焼き樫八角形
産地 福山
最適な用途
  • 初心者
  • 学生
  • オーストラリア国内でAU$200以上の包丁は送料無料
  • DHLエクスプレスによる世界配送、3〜5日でお届け


Tsunehisa Washiji SLDのご紹介です。炭素鋼の高い切れ味と手入れのしやすさを兼ね備えたシリーズです。中核にはSLD鋼(日立金属のセミステンレス鋼の代表格)を採用。炭素鋼のように驚くほど鋭い切れ味を持ちながら、錆への耐性が大幅に向上している点が特長です。靭性にも優れ、ハードな調理でも欠けにくい強さがあります。

最大の魅力は、その印象的な「和紙次」仕上げ。単なる装飾的な槌目模様ではなく、このクラッド加工が食材の貼り付きを防ぎつつ、一本一本に力強い職人の風合いを与えます。まさに実用美と厨房での活躍を両立するデザインです。

日本屈指の工房で製造され、Tsunehisaはこの完成度を実現しながらも高いコストパフォーマンスを提供します。炭素鋼のような切れ味を手軽に目的を持った美しい外観、そしてSLD鋼のバランスの取れた靭性を一本に凝縮。長く続く性能際立つスタイルを求めつつ、手間のかかるメンテナンスからは解放されたい方に最適です。

長所 短所
  • お手頃価格
  • 優れた性能
  • 仕上げに改善の余地あり
お手入れ方法
  1. 硬いものは切らないでください!日本の包丁は硬くてもろいため、骨を切るのは厳禁です。
  2. 使用後は中性洗剤で洗い、水気を拭き取ってください。
  3. 食器洗い機での洗浄はおやめください。木の柄を傷める原因となります。
  4. 包丁を熱源のそばに長時間放置しないよう、ご注意ください。
  5. 刃の鈍った包丁で切るほうが、よく切れる包丁で切るよりもはるかに危険です!
  6. 日本の包丁は、砥石で定期的に研ぐことをお勧めします。
  7. Error: Steel nature unknown

柴田 崇行

柴田 崇行 ― 日本の各産地を一つに

Tsunehisa isn’t tied to one workshop – it’s a celebration of all Japan’s great knife regions. Think Sakai’s laser-precision grinds, Tosa’s mastery of steels like Ginsan, and the distinct traditions of other forging hubs, all united under one brand. By pooling this regional expertise, Tsunehisa delivers exceptional handmade quality at surprisingly accessible prices.

Each knife reflects thoughtful design and rigorous quality control by the Ironclad group (led by Shibata Takayuki). You get authentic techniques – hand-forging, perfect heat treats – paired with modern functionality and Japan's finest steels. Clean aesthetics ensure they look as good as they perform.

Tsunehisa believes a great knife should be a lifelong companion. That’s why they combine serious performance with dedicated after-sales care, including sharpening support. It’s genuine Japanese craftsmanship, distilled for cooks who value both heritage and smart value.

Read more

Forget choosing between Japan's legendary knife-making regions. Tsunehisa brings them all to your kitchen. This innovative brand acts as a curator, sourcing blades from specialist workshops across Sakai, Tosa, and other iconic forging centers – each area contributing its centuries-old expertise. Sakai brings its peerless precision and mastery of carbon steels; Tosa counters with exceptional stainless like the coveted Ginsan (Silver #3); other regions add their own unique forging signatures. This collaborative approach is Tsunehisa’s superpower: harnessing diverse, hyper-specialized skills to create knives offering incredible value without compromising on authentic craftsmanship.

Under the stewardship of Shibata Takayuki's Ironclad group, Tsunehisa maintains a relentless focus on quality and thoughtful design. Experienced staff meticulously inspect every single knife – ensuring consistent geometry, flawless heat treatment, and perfect fit-and-finish before it ever leaves Japan. The result? Blades that feel substantial yet balanced, with grinds that glide through ingredients and steels that take and hold a devastating edge.

Aesthetics are clean, purposeful, and timeless. You won’t find unnecessary ornamentation, but rather a focus on elegant lines, comfortable wa (Japanese) or yo (Western) handles, and finishes that highlight the beauty of the materials – whether it’s the subtle sheen of Ginsan, the rustic charm of kurouchi, or the mesmerizing layers of Damascus cladding.

But Tsunehisa’s commitment extends far beyond the sale. They understand a true kitchen companion needs lifelong support. That’s why they emphasize robust after-sales service, offering maintenance guidance and professional sharpening options to keep your knife performing flawlessly for decades. It’s this combination – regional mastery, rigorous quality control, accessible pricing, and dedicated support – that makes Tsunehisa a standout choice. It’s not just a knife; it’s your gateway to experiencing the breadth and depth of Japan’s blade-making heritage, designed to become an indispensable, cherished part of your cooking journey.

“単一の工房にあらず――柴田が磨き上げた、日本屈指の包丁産地を集めた厳選コレクション”

Est. 2015 | 平成27年
Known for 複数産地から調達した高コスパの包巾を柴田 崇行が最終仕上げ
Read more about 柴田 崇行
柴田 崇行 — 福山
Profile: 三徳
Profile

三徳

三徳

「三つの用途」を意味する三徳包丁は、日本のキッチンにおいて不可欠な存在であり、スライス、ダイスカット、みじん切りに優れています。その汎用性の高さから重宝されており、刃渡りは一般的に15cmから20cm(6〜8インチ)で、幅広い調理作業に対応します。牛刀に比べて切っ先が鋭すぎない独特の形状が特徴で、これが機能性と人気の理由となっています。デザイン上、チョッピングやスライスの操作性が高く、攻撃的すぎない形状であるため、家庭料理人にとって好ましい選択肢となっています。
Composition

SLD Element Composition

Compare with
    SLD
    12.0% 9.0% 6.0% 3.0% 0
    C Carbon 1.5%
    Primary hardening element. Raises hardness and wear resistance — but too much increases brittleness and corrosion susceptibility. As a reference: German 1.4112 (~0.5%) sits at the low end; VG-10 (~1.0%) is a common mid-range; SG2 (1.25–1.45%) and ZDP-189 (~3.0%) represent high and extreme ends respectively.
    C
    1.5%
    Cr Chromium 12.0%
    Raises corrosion resistance; 13%+ qualifies steel as stainless. Also improves hardenability and wear resistance. In kitchen use, higher chromium levels contribute to a slight drag or sticking sensation when cutting — a trade-off for the rust resistance it provides.
    Cr
    12.0%
    V Vanadium 0.3%
    Forms extremely hard carbides for superior edge retention. Also refines grain structure, improving toughness.
    V
    0.3%
    Mo Molybdenum 0.9%
    Improves hardenability and toughness. Boosts corrosion resistance and helps the steel hold hardness under heat.
    Mo
    0.9%
    Mn Manganese 0.4%
    Aids hardenability and strength. Acts as a deoxidiser during smelting. Excess can reduce toughness.
    Mn
    0.4%
    Si Silicon 0.3%
    Strengthens the steel matrix and acts as a deoxidiser. Improves hardness and resistance to oxidation.
    Si
    0.3%
    C — Carbon Cr — Chromium V — Vanadium Mo — Molybdenum Mn — Manganese Si — Silicon
    Hardness 62–64 HRC
    555759616365+
    Steel
    SLD
    Category
    ステンレス鋼
    Manufacturer
    日立金属株式会社、日本
    Hardness
    62–64 HRC
    Steel

    SLD

    • Manufacturer
      • 日立金属株式会社、日本
    • Nature ステンレス鋼
    • Hardness62–64 HRC
    日立SLD鋼は、もともと金型や機械加工工具向けに設計された合金工具鋼です。その組成は第二次世界大戦以来の歴史を持つ定番工具鋼D2とほぼ同等です。高いクロム含有量により半ステンレス特性を持ち、適度なモリブデンとバナジウムが硬質炭化物を形成することで優れた刃持ちを実現しています。靭性は同種の中では平均的ですが、通常のキッチン使用においては問題ありません。鋭い切れ味を求めつつも、伝統的な炭素鋼ほど手入れの手間をかけたくない方に最適な鋼材です。
    Construction: 三枚合わせ・ステンレスクラッド
    Construction

    三枚合わせ・ステンレスクラッド

    三枚合わせ(Sanmai)は両刃包丁に多く見られる構造で、硬い芯鋼の両側に柔らかい地金を鍛接したものです。硬くてもろい芯鋼が熱処理後に鋭い刃先を形成し、柔らかい地金がそれを支えることで、ブレード全体の強度を高めます。

    柔らかい地金は、本焼やモノスチール構造に比べて薄くする工程を容易にします。また、地金にステンレス鋼を使用した場合、炭素鋼やセミステンレス鋼の芯材を錆や変色から守ることができます。

    Finish: 梨地仕上げ
    Finish

    梨地仕上げ

    日本の包丁における「梨地仕上げ」とは、和なしの果皮に似た独特の質感を持つ表面加工のことです。特定の槌目打ちと研磨技術によって施され、刃体にマットでわずかに凹凸のある触り心地を与えます。見た目の美しさだけでなく、食材と鋼材の間に微細な空気層を作ることで食材の貼り付きを防ぐ実用的な効果もあります。三徳や菜切などの伝統的な和包丁によく見られる仕上げで、機能性と意匠性の両面から高く評価されており、料理体験をより豊かなものにします。

    Handle
    Handle

    焼き樫八角形

    • Profile 八角形和式ハンドル
    • Material
      • 樫 - ジャパニーズオーク

    このハンドルは上質な樫(ジャパニーズホワイトオーク)を基調としています。このバリエーションでは、ハンドルの半分が制御された炭化処理を施されています。

    この技法により木材の外観が変化し、焼かれた部分は深みのある豊かな色合いと際立った質感を生み出し、もう半分の手触りの良い温かみのある樫との間に鮮やかな視覚的コントラストが生まれます。炭化処理はまた、木材本来の虎斑(メジュラリーレイ)を強調し、さらなる奥行きと複雑さを加えます。

    劇的な視覚効果にもかかわらず、樫特有の安定性と耐久性は維持されます。炭化された表面は独特の触感を提供しつつ、素材本来の強靭さを保ちます。この処理により、大胆な視覚的特徴と、ジャパニーズホワイトオークに期待される確かな性能を兼ね備えたハンドルに仕上がっています。

    1 / 5

    よくあるご質問

    牛刀と三徳、どちらを選ぶべき?

    どちらも日本の万能包丁であり、ほとんどのご家庭での調理において、その大半をこなすことができます。選択の決め手は、長さ、刃の形状、そして好みの切り方にあります。

    牛刀は日本におけるシェフナイフです。一般的に210mmから240mmの長さがあり、緩やかにカーブした刃線によって、刻むだけでなく揺らしながら滑らせるような切り方も可能です。長いリーチと尖った切っ先により、肉類から大きな野菜まで幅広く対応できる汎用性を備えています。

    三徳はより短く、通常165mmから180mm程度で、平らな輪郭と丸みを帯びた羊足型の切っ先が特徴です。真っ直ぐに押し切る動作に適しており、小さな手や狭いキッチンでも軽快に取り回せます。日本の家庭における定番の包丁です。

    目安として、あらゆる作業をこなせる到達距離のある包丁が欲しければ牛刀を、コンパクトで制御しやすい刃がお好みであれば三徳を選んでみてください。実際、当店のお客様の中には両方を揃えられる方も多くいらっしゃいます。

    We trust this information is correct at the time of writing, but it is not an official document and details may change without notice. If you spot an error, tell us and we'll fix it.

    You May Also Like