Prahran, VIC store now open from Friday to Tuesday, 10am till 6pm.

Tsunehisa  |  SKU: TNHS-G3NWM-SA165

柴田 崇行 銀三鋼 縄目 三徳 165mm

定価 ¥26,100

Availability

  • St Peters, NSW
    2 Bishop St, Unit 2, St Peters NSW 2044
  • Crows Nest, NSW
    107 West St, Shop 1, Crows Nest NSW 2065
    Pickup only
  • Prahran, VIC
    180 Commercial Road, Shop 1, Prahran VIC 3181
    Pickup only
詳細仕様
ライン 柴田崇行 銀三鋼 縄目槌目ダマスカス
刃の形状 三徳 / 三徳
刃の種類 Double Bevel
重量 128 g | 4.5 oz
刃渡り 163 mm | 6 27/64″
あごの高さ 48 mm | 1 57/64″
あご部分の刃幅 2.0 mm | 5/64″
中央の刃幅 1.7 mm | 1/16″
切っ先から1cmの刃幅 1.0 mm | 3/64″
鋼材 銀三鋼 | ステンレス鋼
刃の構造 三枚合わせ・ステンレスダマスカス clad
Hardness (HRC) 60 - 62
表面仕上げ 槌目
八角黒檀柄
産地 福山
最適な用途
  • 初心者
  • 学生
  • オーストラリア国内でAU$200以上の包丁は送料無料
  • DHLエクスプレスによる世界配送、3〜5日でお届け


柴田崇行のNawame(縄目)は、お手頃な価格帯の包丁にさらに興味深い質感をもたらそうとするブランドの新たな試みです。このシリーズのハイライトは、刀身表面に刻まれた新しい模様で、クラッド材の緻密なニッケルダマスカス層と組み合わせることで独特の美しさを生み出しています。エントリークラス市場には似たような槌目ダマスカスが溢れている中、これは新鮮な見た目となっています。

現在、NawameにはAUS10と銀三鋼の2種類があり、どちらもこの価格帯では一般的なステンレス鋼です。AUS10は耐摩耗性に優れ、銀三鋼は研ぎやすいという特徴があります。この確かな素材を基盤に、非常に良好なジオメトリが備わっています。テストカットによると、厚みは平均的で密度の高い食材を切る際には多少の抵抗がありますが、その後の形状によりジャガイモの薄切りが刃に貼り付かないほど優れた離れを実現しています。この戦略は初心の光に非常に似ており、峰側を薄くし、刃元の後ろにわずかに厚みを持たせることで、より強い離れを生み出し、貼り付きによる摩擦を回避しています。さらなる利点として、比較的強度のある刃先となっており、エントリーユーザーにも扱いやすくなっています。

この模様は特筆すべき非常に面白い特徴で、包丁のサイズによっては複数の縄が刃全体に施されています。それぞれの縄をよく見ると、より小さな撚り糸で構成されており、さらにその中には細い糸が見えます。この撚り紐のデザインは複雑ですが、視覚的な美しさは非常に心地よく、繰り返される模様が刃全体に広がるテクスチャーを形成しています。注意深く見ると、ダマスカス模様もそのパターンを引き継いでおり、テクスチャーがクラッドラインまで流れるように続いています。これを実現するためには、ブレードの打ち抜きや研削の前に、テクスチャー加工されたローラーで圧延し、窪みを作りながらダマスカス模様を変形させる必要があります。

このシリーズの価格は基本的なレベルに抑えられていますが、メーカーがこのラインに注いだデザインの努力と工具への投資が伺えます。長くこれらの包丁に親しんできた愛好家にとって、こうした特別な槌目模様はかつて黒﨑勇やカトウ打刃物製作所といった越前の職人たちの専売特許でした。公平な比較ではありませんが、このような魅力的で個性豊かな特徴がエントリークラスの市場に登場したことは素晴らしいことです。

長所 短所
  • 芸術性が高い
  • 手頃な価格
  • 家庭用に最適
  • やや厚め
お手入れ方法
  1. 硬いものは切らないでください!日本の包丁は硬くてもろいため、骨を切るのは厳禁です。
  2. 使用後は中性洗剤で洗い、水気を拭き取ってください。
  3. 食器洗い機での洗浄はおやめください。木の柄を傷める原因となります。
  4. 包丁を熱源のそばに長時間放置しないよう、ご注意ください。
  5. 刃の鈍った包丁で切るほうが、よく切れる包丁で切るよりもはるかに危険です!
  6. 日本の包丁は、砥石で定期的に研ぐことをお勧めします。
  7. Error: Steel nature unknown

柴田 崇行

柴田 崇行 ― 日本の各産地を一つに

Tsunehisa isn’t tied to one workshop – it’s a celebration of all Japan’s great knife regions. Think Sakai’s laser-precision grinds, Tosa’s mastery of steels like Ginsan, and the distinct traditions of other forging hubs, all united under one brand. By pooling this regional expertise, Tsunehisa delivers exceptional handmade quality at surprisingly accessible prices.

Each knife reflects thoughtful design and rigorous quality control by the Ironclad group (led by Shibata Takayuki). You get authentic techniques – hand-forging, perfect heat treats – paired with modern functionality and Japan's finest steels. Clean aesthetics ensure they look as good as they perform.

Tsunehisa believes a great knife should be a lifelong companion. That’s why they combine serious performance with dedicated after-sales care, including sharpening support. It’s genuine Japanese craftsmanship, distilled for cooks who value both heritage and smart value.

Read more

Forget choosing between Japan's legendary knife-making regions. Tsunehisa brings them all to your kitchen. This innovative brand acts as a curator, sourcing blades from specialist workshops across Sakai, Tosa, and other iconic forging centers – each area contributing its centuries-old expertise. Sakai brings its peerless precision and mastery of carbon steels; Tosa counters with exceptional stainless like the coveted Ginsan (Silver #3); other regions add their own unique forging signatures. This collaborative approach is Tsunehisa’s superpower: harnessing diverse, hyper-specialized skills to create knives offering incredible value without compromising on authentic craftsmanship.

Under the stewardship of Shibata Takayuki's Ironclad group, Tsunehisa maintains a relentless focus on quality and thoughtful design. Experienced staff meticulously inspect every single knife – ensuring consistent geometry, flawless heat treatment, and perfect fit-and-finish before it ever leaves Japan. The result? Blades that feel substantial yet balanced, with grinds that glide through ingredients and steels that take and hold a devastating edge.

Aesthetics are clean, purposeful, and timeless. You won’t find unnecessary ornamentation, but rather a focus on elegant lines, comfortable wa (Japanese) or yo (Western) handles, and finishes that highlight the beauty of the materials – whether it’s the subtle sheen of Ginsan, the rustic charm of kurouchi, or the mesmerizing layers of Damascus cladding.

But Tsunehisa’s commitment extends far beyond the sale. They understand a true kitchen companion needs lifelong support. That’s why they emphasize robust after-sales service, offering maintenance guidance and professional sharpening options to keep your knife performing flawlessly for decades. It’s this combination – regional mastery, rigorous quality control, accessible pricing, and dedicated support – that makes Tsunehisa a standout choice. It’s not just a knife; it’s your gateway to experiencing the breadth and depth of Japan’s blade-making heritage, designed to become an indispensable, cherished part of your cooking journey.

“単一の工房にあらず――柴田が磨き上げた、日本屈指の包丁産地を集めた厳選コレクション”

Est. 2015 | 平成27年
Known for 複数産地から調達した高コスパの包巾を柴田 崇行が最終仕上げ
Read more about 柴田 崇行
柴田 崇行 — 福山
Profile: 三徳
Profile

三徳

三徳

「三つの用途」を意味する三徳包丁は、日本のキッチンにおいて不可欠な存在であり、スライス、ダイスカット、みじん切りに優れています。その汎用性の高さから重宝されており、刃渡りは一般的に15cmから20cm(6〜8インチ)で、幅広い調理作業に対応します。牛刀に比べて切っ先が鋭すぎない独特の形状が特徴で、これが機能性と人気の理由となっています。デザイン上、チョッピングやスライスの操作性が高く、攻撃的すぎない形状であるため、家庭料理人にとって好ましい選択肢となっています。
Composition

銀三鋼 Element Composition

Compare with
    銀三鋼
    13.75% 10.3% 6.9% 3.4% 0
    C Carbon 1.02%
    Primary hardening element. Raises hardness and wear resistance — but too much increases brittleness and corrosion susceptibility. As a reference: German 1.4112 (~0.5%) sits at the low end; VG-10 (~1.0%) is a common mid-range; SG2 (1.25–1.45%) and ZDP-189 (~3.0%) represent high and extreme ends respectively.
    C
    1.02%
    Cr Chromium 13.75%
    Raises corrosion resistance; 13%+ qualifies steel as stainless. Also improves hardenability and wear resistance. In kitchen use, higher chromium levels contribute to a slight drag or sticking sensation when cutting — a trade-off for the rust resistance it provides.
    Cr
    13.75%
    Mn Manganese 0.8%
    Aids hardenability and strength. Acts as a deoxidiser during smelting. Excess can reduce toughness.
    Mn
    0.8%
    Si Silicon 0.35%
    Strengthens the steel matrix and acts as a deoxidiser. Improves hardness and resistance to oxidation.
    Si
    0.35%
    P Phosphorus 0.03%
    Impurity from the smelting process. Even small amounts cause brittleness — steelmakers keep this as low as possible.
    P
    0.03%
    S Sulfur 0.02%
    Impurity that reduces toughness and promotes brittleness. Intentionally added only in free-machining steels.
    S
    0.02%
    C — Carbon Cr — Chromium Mn — Manganese Si — Silicon P — Phosphorus S — Sulfur
    Hardness 60–62 HRC
    555759616365+
    Steel
    銀三鋼
    Category
    ステンレス鋼
    Manufacturer
    日立金属株式会社、日本
    Hardness
    60–62 HRC
    Steel

    銀三鋼

    • Manufacturer
      • 日立金属株式会社、日本
    • Nature ステンレス鋼
    • Hardness60–62 HRC
    銀三鋼(別名Silver #3またはG3鋼)は、高品質な包丁に使用されるステンレス鋼の一種です。炭素鋼特有の伝統的な切れ味と手触りを維持しつつ、ステンレス鋼の錆への強さを兼ね備えている点が高く評価されています。適度な量の炭素やクロムなどの合金元素を含み、刃持ちと研ぎやすさのバランスに優れています。特に微細な組織構造により非常に鋭い刃付けが可能で、錆に強いため、炭素鋼のパフォーマンスを求めつつ手入れの手間を抑えたいプロの料理人や家庭の調理人に人気があります。銀三鋼の包丁は耐久性が高く、手入れが容易で切れ味にも優れており、高品質なステンレス製刃物をお探しの方に最適な選択肢となっています。
    Construction: 三枚合わせ・ステンレスダマスカス clad
    Construction

    三枚合わせ・ステンレスダマスカス clad

    三枚合わせ(Sanmai)は両刃包丁に一般的な構造で、硬い芯鋼の両側に柔らかい地金を鍛接したものです。熱処理後、硬く脆い芯鋼が鋭い刃先を形成し、柔らかい地金が芯鋼を支えて刃全体の強度を高めます。

    ダマスカス三枚合わせは、地金にダマスカス鋼を使用した構造で、刃に装飾的な美しさを加えます。ステンレス芯鋼の包丁の場合、ダマスカス地金もステンレスとなるため、炭素鋼やセミステンレスの芯鋼を錆や変色から保護する役割も果たします。

    柔らかい地金は、本焼やモノスティール構造に比べて薄く削る工程を容易にします。ただし、地金がダマスカスの場合、エッチング・研磨・鏡面仕上げに関わらず、削りの過程で地金の模様が変化し、新品時の状態とは異なる見た目になります。

    Finish: 槌目
    Finish

    槌目

    日本の包丁における「槌目」仕上げとは、刃の表面に施された独特のハンマーテクスチャーを指します。この伝統的な技法は、独自の美的魅力を加えるだけでなく、切り分け時の抵抗を減らし、食材が刃に貼り付くのを防ぐといった実用的な利点も提供します。機能性と芸術性を融合させた職人技の証であり、それぞれの包丁を単なる道具ではなく、一つの芸術作品へと昇華させます。

    Handle
    Handle

    八角黒檀柄

    • Profile 八角和柄
    • Material
      • 黒檀

    This handle, crafted from a single piece of ebony, exemplifies minimalist elegance and functional design. Its unique octagonal shape, featuring a subtle taper, offers a comfortable grip and a visually appealing geometric profile. The ebony wood, known for its deep, rich color and durability, has been meticulously milled from a single block, ensuring a seamless construction that highlights the wood's natural beauty and grain. The handle's surface has been highly polished, achieving a glossy finish that not only enhances the ebony's luxurious dark hue but also provides a smooth, tactile experience for the user. This design choice reflects a minimalist approach, focusing on simplicity, quality, and usability. The combination of the octagonal shape with the taper adds a modern twist to the classic material, making it a standout piece that blends traditional craftsmanship with contemporary aesthetics.

    1 / 5

    よくあるご質問

    牛刀と三徳、どちらを選ぶべき?

    どちらも日本の万能包丁であり、ほとんどのご家庭での調理において、その大半をこなすことができます。選択の決め手は、長さ、刃の形状、そして好みの切り方にあります。

    牛刀は日本におけるシェフナイフです。一般的に210mmから240mmの長さがあり、緩やかにカーブした刃線によって、刻むだけでなく揺らしながら滑らせるような切り方も可能です。長いリーチと尖った切っ先により、肉類から大きな野菜まで幅広く対応できる汎用性を備えています。

    三徳はより短く、通常165mmから180mm程度で、平らな輪郭と丸みを帯びた羊足型の切っ先が特徴です。真っ直ぐに押し切る動作に適しており、小さな手や狭いキッチンでも軽快に取り回せます。日本の家庭における定番の包丁です。

    目安として、あらゆる作業をこなせる到達距離のある包丁が欲しければ牛刀を、コンパクトで制御しやすい刃がお好みであれば三徳を選んでみてください。実際、当店のお客様の中には両方を揃えられる方も多くいらっしゃいます。

    柴田崇行 縄目 銀三鋼 槌目ダマスカスシリーズとは?どのような方におすすめですか?

    常久縄目銀三鋼槌目ダマスカスシリーズは、銀三鋼の芯材に緻密なニッケルダマスカス地金を被せ、独特の縄目状の質感を特徴とするお手頃な価格帯の包丁シリーズです。高価すぎずに個性的な美しさを求める初心者や学生の方を中心に設計されています。

    このシリーズが際立つ理由は、エントリー層の市場でよく見られる標準的な槌目仕上げとは一線を画し、独自の「縄目」模様による個性的な外観を提供している点にあります。芯材に銀三鋼、側材にニッケルダマスカスを採用していますが、刃体はやや厚めの作りとなっているため、薄く繊細な刃物とは使い勝手が異なる点にご注意ください。在庫のある具体的なモデルとしては、常久 銀三鋼 縄目 牛刀 240mmはミドルレンジの価格帯、常久 銀三鋼 縄目 ペティナイフ 135mmはエントリー層の価格帯でご購入いただけます。

    We trust this information is correct at the time of writing, but it is not an official document and details may change without notice. If you spot an error, tell us and we'll fix it.

    You May Also Like